Kitchen Cabinet Refacing Information

Before you start searching compare refacing companies just read through this very informative write-up. I will present some of the most important basics and provide you with something to think about as you make plan to redo your kitchen.

You will come hundreds of pages online that claim to offer the best advise and information on kitchen cabinetrefacing but mixing all that different advise can lead to a disastrous output. Below I share some of the most useful ideas on this subject.

kitchen Cabinet Refacing Defined

This is a process whereby old cabinets are redone with a new coating like laminate, thermo-foil or veneer. In most cases you may have to replace only the doors and drawer fronts.  Ideally the process is easier and faster than a complete kitchen remodel.

In fact is can be as far less as 60% when comparing with the cost of buying new cabinets. So in essence, it is the most efficient, affordable and hassle-free way to boost your kitchen’s look and feel.

Types of coating used  

Laminate

Laminate is primarily made of plastic film or thin sheet formed from resins such as polyethylene and polypropylene. This is arguably the cheapest material to usebut it is not as resistant in wear and tear. However, it can really withstand heating oil and does seal heat really well.

Defining Thermofoil

This is considered to be a revolutionary new wood-like material for Cabinetry.  It has many names e.g. RTF or Vinyl and its thick vinyl film is bonded enduringly to a wood core that is warp-resistant.

Defining Wood Veneer

This is material made from wood. It is quite thin as it is cut from a log with a peeling, sawing or slicing machine. This is used to give the cabinets a fine wood grain. There are many varieties of this feature. Ideally I recommend that you consult an export before making any decision on these.


Related Articles

Comments

Leave a Reply